If the hat is worn for a long time, stains will be stained inside and out, especially the sweaty part of the hat. How should the hat be cleaned? If the washing method is improper, it is easy to cause discoloration or deformation of the hat. Therefore, the cleaning method of hats of different materials is different.
1) How to clean hats of different materials-cotton fabric
Cotton fabric has strong alkali resistance, acid resistance, and high temperature resistance. It can be washed with various soaps or detergents. Before washing, it can be soaked in water for a few minutes, but not too long to avoid damage to the color. Underwear should not be soaked in hot water to prevent the protein in the sweat from coagulating and sticking to the clothing, and yellow sweat spots will appear.
When washing with detergent, the best water temperature is 40~50℃. When rinsing, you can master the “small amount and many times” method, that is, you do not need to use a lot of water for each rinse; but you need to wash several times. Wring dry after each rinse, and then perform a second rinse to improve washing efficiency. Dry clothes in a ventilated and shady place to avoid exposure to sunlight and fading of colored fabrics.
2) How to clean hats of different materials-hemp fabric
Hemp fiber is hard and has poor cohesion. It is lighter than cotton fabric when washing. Do not use a hard brush and vigorously rubbing to avoid fluffing on the cloth surface. Do not twist with force after washing, do not scald colored fabrics with hot water, and should not be exposed to the sun to avoid color fading.
3) How to clean hats of different materials-silk fabric
Before washing, soak in water for about 10 minutes. The soaking time should not be too long. Avoid washing with alkaline water, and use neutral soap or soap flakes or neutral detergent. The lotion should be lukewarm or room temperature. After washing, gently squeeze the water and never twist it. It should be dried in a cool and ventilated place, not in the sun, let alone drying.
4) Cleaning method for hats of different materials-wool fabric
Wool is not alkali resistant, so it should be washed with neutral detergent or soap flakes. Wool fabrics will shrink and deform in an aqueous solution above 30°C, so the temperature of the washing bath should not exceed 40°C. Usually use room temperature (25℃) water to prepare detergent aqueous solution. Avoid scrubbing with a washboard when washing. Even if you use a washing machine to wash, you should wash lightly, and the washing time should not be too long to prevent milling.
Do not wring after washing, squeeze it with your hands to remove water, and then drain. Half a minute is appropriate when dehydrating with a washing machine. It should be dried in a cool and ventilated place, and not exposed to strong sunlight to prevent the fabric from losing luster and elasticity and causing a decrease in strength.
5) Cleaning method for hats of different materials-viscose fabric
Viscose fiber has a large shrinkage rate and low wet strength. When washing, it should be washed and soaked, and it should not be soaked for a long time. The viscose fabric will become hard when exposed to water, so it should be washed gently to avoid fluffing or cracking. Use neutral detergent or low-alkali detergent. The temperature of the washing liquid cannot exceed 45°C. After washing, fold up the clothes, squeeze out the water a lot, and avoid twisting them. Avoid exposure to the sun after washing, and dry it in a cool or ventilated place.
6) Cleaning method for hats of different materials-polyester fabric
First soak in cold water for 15 minutes, and then wash with general synthetic detergent. The temperature of the lotion should not exceed 45°C. The dirty parts of the neckline and cuffs can be scrubbed with a brush. After washing, rinse, twist lightly, dry in a cool and ventilated place, do not expose to the sun, or dry to avoid wrinkles due to heat.
7) Cleaning method for hats of different materials-acrylic fabric
Basically similar to polyester fabric washing. Soak in warm water for 15 minutes, and then wash with low-alkali detergent, rubbing and rubbing gently. The thick fabric is washed with a soft brush, and finally dehydrated or gently wringed to remove the water. Pure acrylic fabrics can be aired, but blended fabrics should be dried in a cool place.
8) Cleaning method for hats of different materials-nylon fabric
First soak in cold water for 15 minutes, and then wash with general detergent (regardless of whether it contains alkali). The temperature of the lotion should not exceed 45°C. After washing, ventilate and dry, do not expose to the sun.
9) How to clean hats of different materials-vinylon fabric
Soak it in room temperature water first, and then wash it at room temperature. The detergent can be general washing powder. Do not use hot water to avoid swelling, hardening, or even deformation of vinylon fibers. Dry after washing and avoid sun exposure.